1Port Industrial Gigabit Fiber Media Converter
Product description:
This industrial-grade gigabit fiber media converter also named as gigabit industrial switch,which uses FPGA and CPLD technology to achieve long-distance transmission of one Gigabit network through a single-mode fiber (up to 80 km). It has good electromagnetic compatibility and anti-vibration and shock resistance. The outer casing is made of aluminum alloy, which has excellent heat dissipation performance, corrosion resistance, oxidation resistance and no rust. The power is industrial grade isolated type with a peak value of 25W (the actual application power consumption is between 5W-10W), ensuring sufficient power output. It remains in long-term operation in extremely harsh -40° cold or +75° hot environments. The device was put into the market in 2011, since then it has been reliably applied in harsh environments such as petrochemical, rail, highway, high-speed rail, environmental protection, and mining.
Features:
1, Support 1 to 4 network transmission, 100 Mbps shared network, data switch;
2, Plug and play, wide temperature, small volume, fanless expansion industrial grade design, electromagnetic compatibility reaches Level 4;
3, Multi-layer composite sheet, double-sided design, no bent under high temperature, better heat dissipation;
4, Professional chips, imported filters and German WURTH inductors to ensure the stability of operation;
5, 10/100MBaseTX to 100BaseFX converter,single mode or multimode fiber selectable;
6, Support full duplex flow control (symmetric or asymmetric);
7, Support 2 way half-duplex RS485 serial port or RS232 data;
8,100% line rate bandwidth, non-blocking data exchange;
9,Distance up to 100 kilometers;
10, Wide optical dynamic range, no optical attenuator;
11, Rail or wall mounted installation;
12,Super lightning protection, anti-induction high voltage, anti-surge, etc.;
13, -40 ° C to +80 ° C working environment temperature;
14, the average trouble-free working time reached 400,000 hours;
Product specification:
| Product Name: 1Port Industrial Gigabit Fiber Media Converter |
| Network Electronic | Numbers of Interface | 1 x RJ45 |
| Rate | 10/100/1000Mbps adaptive |
| Network Protocols | IEEE 802.3i ；IEEE 802.3u ；IEEE 802.3z；IEEE 802.3ad ；IEEE 802.3at |
| Working Mode | Full duplex |
| Network cable connection | Network cable cross/direct connection adaptive |
| Network Cable | Cat6<100m |
| Data | Data Protocol | RS485/RS422/RS232 |
| Data Rate | 0~384 Kbps |
| Error Rate | < 10-9 |
| Connector | Standard Terminal Block |
| Fiber | Wavelength | 1310/1550nm |
| Fiber Type | SC,FC Singlemode/Multimode |
| Distance | Multi-mode: 550m; Single-mode: 20Km default,40/60/80KM selectable |
| Rate | 1.25G |
| General | Power Supply | Input Voltage:DC12V |
| Material | Aluminum |
| Installation | Din Rail |
| Dimension | 142mm× 120mm×48mm |
| Package Size | 19x17x7.2cm |
| Net Weight | 0.5Kg/pcs |
| Gross Weight | 0.6Kg/pcs |
| Working temperature | -40~80℃ |
| Storage temperature | -40~85℃ |
| MTBF | 400,000hours |
| Relative Humidity | 5%~95 %( no condensation) |
Package Information:
Connection Diagram:
|
|
1Port Din Rail Industrial Gigabit Fiber Media Converter over SM/MM fiber to 20~80Km Images
|
